Instalation Linux Client error!

I need help, I have already installed and redid all the procedures of Pr-einstallation checklist link below and I can not finish installing the agent on the linux server.

http://community.f-secure.com/t5/End-point/Pre-installation-checklist-for-F/ta-p/44451

return Complie-Drivers:

Running /opt/f-secure/fsav/bin/fsav-compile-drivers Compiling dazuko driver for kernel version 2.6.32-358.el6.x86_64 Driver for kernel version 2.6.32-358.el6.x86_64 - OK. Compiling redirfs driver for kernel version 2.6.32-358.el6.x86_64 redirfs make redirfs; failed. See output in /tmp/redirfs.NIZQhW/make.output Compiling dazuko driver for kernel version 2.6.32-431.20.5.el6.x86_64 Driver for kernel version 2.6.32-431.20.5.el6.x86_64 - OK. Compiling redirfs driver for kernel version 2.6.32-431.20.5.el6.x86_64 Driver for kernel version 2.6.32-431.20.5.el6.x86_64 - OK. Feature summary: - Real-time virus protection enabled - Integrity checking enabled - Firewall enabled Installation completed successfully. Starting F-Secure Linux Security modules (/etc/init.d/fsma start) To configure the product, please run /opt/f-secure/fsav/fsav-config. If you want to completely disable some of the product modules, please run /opt/f-secure/fsav/sbin/fschooser.

[root@ fsdiag.17200]# cat /tmp/redirfs.NIZQhW/make.output

make: *** /lib/modules/2.6.32-358.el6.x86_64/build/: No such file or directory. Stop.

Linux CentOS 6.5

Thanks

Marlon Piassa

Find more posts tagged with

Comments

Federico

Hi,

If you mean you renamed the files, you shouldn't. Please do not rename the files. The files are meant to change and rpm mentioning it can't find them is safe to ignore.

I don't believe zabbix could be preventing the program from writing to that folder, zabbix is supposed to be used for monitoring.

Since the error message suggests the issue could be due to AppArmor, it might be worth looking to see if disabling it temporarily, allows for the files to be written. That being said, those are man pages for fsav, fsavd and dbupdate. They won't affect the program's functions.

Regards,

Piassa

Hi Federico

I renomiei files and the return was:

.......T. /etc/opt/f-secure/fssp/fssp.conf

....L.... /opt/f-secure/fssp/lib/libfsmgmt.2.so

.M....... /var/opt/f-secure/fssp/databases/aqualnx32.0

.M...U... /var/opt/f-secure/fssp/databases/aqualnx32.0/libaqua32.so

.M....... /var/opt/f-secure/fssp/databases/fmlibunix.0

.M...U... /var/opt/f-secure/fssp/databases/fmlibunix.0/libfm-lnx32.so

.M....... /var/opt/f-secure/fssp/databases/hydralinux.0

/var/opt/f-secure/fssp/databases/hydralinux.0/01@hydra.pub faltando

/var/opt/f-secure/fssp/databases/hydralinux.0/02@hydra.mf faltando

/var/opt/f-secure/fssp/databases/hydralinux.0/02@hydra.ref faltando

.M...U... /var/opt/f-secure/fssp/databases/hydralinux.0/BW_datapak.bif

.M...U... /var/opt/f-secure/fssp/databases/hydralinux.0/BW_datapak.bis

.M...U... /var/opt/f-secure/fssp/databases/hydralinux.0/FS@hydra.ini

.M...U... /var/opt/f-secure/fssp/databases/hydralinux.0/bw_name.html

.M...U... /var/opt/f-secure/fssp/databases/hydralinux.0/enginefiles-fselinux.set

.M...U... /var/opt/f-secure/fssp/databases/hydralinux.0/fsedb.dat

.M...U... /var/opt/f-secure/fssp/databases/hydralinux.0/fselinux.cr

.M...U... /var/opt/f-secure/fssp/databases/hydralinux.0/hydralinux-update.ini

.M...U... /var/opt/f-secure/fssp/databases/hydralinux.0/hydralinux-update.mf

.M...U... /var/opt/f-secure/fssp/databases/hydralinux.0/info.iad

.M...U... /var/opt/f-secure/fssp/databases/hydralinux.0/libfsecr32-linux.so

.M...U... /var/opt/f-secure/fssp/databases/hydralinux.0/licenses-fselinux.txt

I realized that it generates the following line when I run the setup command
/ opt / FSecure / FSAV / FSAV-config

Configuring...Can't access man pages under /opt/f-secure/fssp/man. Perhaps AppArmor or similar is blocking the access. Please see the distribution's documentation on how to configure it.

apparently use zabbix on the network, has a feature that may be conflicting or blocking? because this is the same error that happens on all servers, including different distributions, CentOS, Debian.

best regards,

Marlon Piassa

Federico

Hi,

Those are the folders I mentioned. rpm can't find the original folders:

/var/opt/f-secure/fssp/databases/aqualnx32.0/
/var/opt/f-secure/fssp/databases/fmlibunix.0/
/var/opt/f-secure/fssp/databases/hydralinux.0/

Because they were removed an replaced with the ones below as the updates were downloaded:

/var/opt/f-secure/fssp/databases/aqualnx32.1407399202/

/var/opt/f-secure/fssp/databases/fmlibunix.1406711097/

/var/opt/f-secure/fssp/databases/hydralinux.1407316850/

Regards,

Piassa

Hi Federico,

cd /var/opt/f-secure/fssp/databases/

aqualnx32.1407399202 dbupdate_signaling.lock fmlibunix.1406711097 orsplnx32.0
db.lock dynamic-license hydralinux.1407316850

thanks!

Federico

What do you see listed under:

/var/opt/f-secure/fssp/databases/

Regards,

Piassa

Sorry Federico, but I did not.

Federico

Hi Marlon,

Those files are part of the Virus Definition database, as they get updated, their name changes. If you go to that folder you will see a few folders which start with the same name but have a different number after the '.' (dot).

rpm won't be able to find the original files because they are no longer there since the database has received updates.

Regards.

Piassa

Excellent Federico

Actually the error was referring to an outdated kernel. but falls into a similar process with another question I have.

I installed all the libraries as described in the procedure, ask if the installation it will say is that with the latest version, but in the fsdiag log it shows me that has a lot of missing libraries and I can not install them.

[root@ftp2 fsdiag.4975]# cat rpm_verify.txt
f-secure-automatic-update-agent
.....UG..    /opt/f-secure/fsaua/bin/fsaua-ctrl

f-secure-security-platform
.......T.    /etc/opt/f-secure/fssp/fssp.conf
....L....    /opt/f-secure/fssp/lib/libfsmgmt.2.so
/var/opt/f-secure/fssp/databases/aqualnx32.0 faltando
/var/opt/f-secure/fssp/databases/aqualnx32.0/libaqua32.so faltando
/var/opt/f-secure/fssp/databases/fmlibunix.0 faltando
/var/opt/f-secure/fssp/databases/fmlibunix.0/libfm-lnx32.so faltando
/var/opt/f-secure/fssp/databases/hydralinux.0 faltando
/var/opt/f-secure/fssp/databases/hydralinux.0/01@hydra.pub faltando
/var/opt/f-secure/fssp/databases/hydralinux.0/02@hydra.mf faltando
/var/opt/f-secure/fssp/databases/hydralinux.0/02@hydra.ref faltando
/var/opt/f-secure/fssp/databases/hydralinux.0/BW_datapak.bif faltando
/var/opt/f-secure/fssp/databases/hydralinux.0/BW_datapak.bis faltando
/var/opt/f-secure/fssp/databases/hydralinux.0/FS@hydra.ini faltando
/var/opt/f-secure/fssp/databases/hydralinux.0/bw_name.html faltando
/var/opt/f-secure/fssp/databases/hydralinux.0/enginefiles-fselinux.set faltando
/var/opt/f-secure/fssp/databases/hydralinux.0/fsedb.dat faltando
/var/opt/f-secure/fssp/databases/hydralinux.0/fselinux.cr faltando
/var/opt/f-secure/fssp/databases/hydralinux.0/hydralinux-update.ini faltando
/var/opt/f-secure/fssp/databases/hydralinux.0/hydralinux-update.mf faltando
/var/opt/f-secure/fssp/databases/hydralinux.0/info.iad faltando
/var/opt/f-secure/fssp/databases/hydralinux.0/libfsecr32-linux.so faltando
/var/opt/f-secure/fssp/databases/hydralinux.0/licenses-fselinux.txt faltando

f-secure-management-agent-unix-4.77.1333-1.i386.rpm
o pacote f-secure-management-agent-unix-4.77.1333-1.i386.rpm nÃ£o estÃ¡ instalado

Federico

Hi Marlon,

As you can see in the logs, the modules are compiling correctly for the kernel you are currently using, 2.6.32-431.20.5.el6.x86_64 (since you followed the steps I mentioned). The issue remains for the old kernel 2.6.32-358.el6.x86_64.

At this point, the program will work correctly as long as you boot on the current kernel. Should you wish to allow the modules to compile for the old kernel, you will need to install the headers and sources for the old kernel too. However, if they are old, you might not be able to find them on the repositories.

That being the case, sticking to kernel 2.6.32-431.20.5.el6.x86_64 will keep the program working correctly. Unless you are really using it, you could remove kernel 2.6.32-358.el6.x86_64. You will then no longer see the compilation error for that kernel version.

Regards,

Piassa

Hi Federico,

I do not know what to do, already rebooked the procedure several times, already reinstalled the solution in the way that you put in the forum but does not work.

the procedures below is after doing that suggested in other posts.

Installation completed successfully.
Starting F-Secure Linux Security modules (/etc/init.d/fsma start)

To configure the product, please run /opt/f-secure/fsav/fsav-config.

If you want to completely disable some of the product modules, please run /opt/f-secure/fsav/sbin/fschooser.
[root@ftp2 f-secure-linux-security-10.00.60]# cat /tmp/redirfs.LpR/make.output
make: *** /lib/modules/2.6.32-358.el6.x86_64/build/: No such file or directory. Stop.
[root@ftp2 f-secure-linux-security-10.00.60]# rpm -qa | grep kernel
dracut-kernel-004-336.el6_5.2.noarch
kernel-devel-2.6.32-431.23.3.el6.x86_64
kernel-firmware-2.6.32-431.23.3.el6.noarch
kernel-devel-2.6.32-431.20.5.el6.x86_64
kernel-2.6.32-358.el6.x86_64
kernel-2.6.32-431.20.5.el6.x86_64
kernel-headers-2.6.32-431.23.3.el6.x86_64
kernel-2.6.32-431.23.3.el6.x86_64
[root@ftp2 f-secure-linux-security-10.00.60]# yum install "kernel-devel-$(uname-r)" "kernel-headers-$(uname -r)"
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirrors.dcarsat.com.ar
* extras: mirrors.dcarsat.com.ar
* updates: mirrors.dcarsat.com.ar
Setting up Install Process
Package kernel-devel-2.6.32-431.23.3.el6.x86_64 already installed and latest version
Package kernel-headers-2.6.32-431.23.3.el6.x86_64 already installed and latest version
Nothing to do
[root@ftp2 f-secure-linux-security-10.00.60]# /opt/f-secure/fsav/bin/fsav-compile-drivers

Existing dazuko driver for kernel 2.6.32-358.el6.x86_64 is still valid, not recompiling
Compiling redirfs driver for kernel version 2.6.32-358.el6.x86_64
redirfs make redirfs; failed. See output in /tmp/redirfs.sqDHzr/make.output
Existing dazuko driver for kernel 2.6.32-431.20.5.el6.x86_64 is still valid, not recompiling
Compiling redirfs driver for kernel version 2.6.32-431.20.5.el6.x86_64
Driver for kernel version 2.6.32-431.20.5.el6.x86_64 - OK.
Existing dazuko driver for kernel 2.6.32-431.23.3.el6.x86_64 is still valid, not recompiling
Compiling redirfs driver for kernel version 2.6.32-431.23.3.el6.x86_64
Driver for kernel version 2.6.32-431.23.3.el6.x86_64 - OK.

[root@ftp2 f-secure-linux-security-10.00.60]# cat /tmp/redirfs.sqDHzr/make.output
make: *** /lib/modules/2.6.32-358.el6.x86_64/build/: Arquivo ou diretÃ³rio nÃ£o encontrado. Pare.
[root@ftp2 f-secure-linux-security-10.00.60]#

best regards

Marlon Piassa

Federico

Hi Marlon,

The instructions were written following the kernel version you were using when you placed the post. Since you are now using a newer kernel, you have to install the corresponding matching packages:

yum install "kernel-devel-$(uname -r)" "kernel-headers-$(uname -r)"

Once they are installed, you can run the installation again.

Regards,

Piassa

Hello Federico,

follows the result of the process,

redid the whole installation validei all requested in the pre-installation document libraries, ran the command you sent, but the error persists.

[root@ftp2 ~]# /opt/f-secure/fsav/bin/fsav-compile-drivers

Compiling dazuko driver for kernel version 2.6.32-358.el6.x86_64

Driver for kernel version 2.6.32-358.el6.x86_64 - OK.

Compiling redirfs driver for kernel version 2.6.32-358.el6.x86_64

redirfs make redirfs; failed. See output in /tmp/redirfs.34wQgE/make.output

Compiling dazuko driver for kernel version 2.6.32-431.20.5.el6.x86_64

Driver for kernel version 2.6.32-431.20.5.el6.x86_64 - OK.

Compiling redirfs driver for kernel version 2.6.32-431.20.5.el6.x86_64

redirfs make redirfs; failed. See output in /tmp/redirfs.p5DOIQ/make.output

Compiling dazuko driver for kernel version 2.6.32-431.23.3.el6.x86_64

Driver for kernel version 2.6.32-431.23.3.el6.x86_64 - OK.

Compiling redirfs driver for kernel version 2.6.32-431.23.3.el6.x86_64

Driver for kernel version 2.6.32-431.23.3.el6.x86_64 - OK.

Starting real-time protection...done

[root@ftp2 ~]# cat /tmp/redirfs.34wQgE/make.output

make: *** /lib/modules/2.6.32-358.el6.x86_64/build/: Arquivo ou diretório não encontrado. Pare.

[root@ftp2 ~]# cat /tmp/redirfs.p5DOIQ/make.output

make: *** /lib/modules/2.6.32-431.20.5.el6.x86_64/build/: Arquivo ou diretório não encontrado. Pare.

[root@ftp2 ~]# yum install kernel-devel-2.6.32-358.el6.x86_64

Loaded plugins: fastestmirror

Loading mirror speeds from cached hostfile

* base: mirror.gtdinternet.com

* extras: mirror.gtdinternet.com

* updates: mirrors.dcarsat.com.ar

Setting up Install Process

No package kernel-devel-2.6.32-358.el6.x86_64 available.

Error: Nothing to do

[root@ftp2 ~]# uname -a

Linux ftp2 2.6.32-431.23.3.el6.x86_64 #1 SMP Thu Jul 31 17:20:51 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux

[root@ftp2 ~]# cat /etc/issue

CentOS release 6.5 (Final)

Kernel \r on an \m

Thanks!

Best Regards,

Marlon Piassa

Federico

Hi Marlon,

The logs mention the problem is caused because of the following missing folder:

/lib/modules/2.6.32-358.el6.x86_64/build/

Which is not really a folder but a link to the kernel sources. Either the link is broken or you do not have the kernel sources installed. If the kernel source for that particular kernel is still available in the repositories, you should install it by running a line such as the one below:

yum install kernel-devel-2.6.32-358.el6.x86_64

If the package is not available, you will need to upgrade your current kernel to a version for which you can find its matching devel package.

The installation should work at that point.

Regards,