Setting up authenticated scan for network devices (SSH).

krucko

To set up authenticated scan, when target is a network device (Cisco, Fortigate and Palo Alto devices are currently supported with SSH).

1. Create new scan following instructions for Linux machines:
   https://www.withsecure.com/userguides/product.html#business/radar/4.0/en/concept_304E8DF61107461B88A04680DACA32B4-4.0-en
2. You can use either key or username + password credentials, but bear in mind, that your target needs to be configured accordingly.
3. Account used for the authenticated scan needs to be able to execute following commands:
   Palo Alto: sw-version:.*
   Fortigate: get system status
   Cisco: show version



junya

@krucko

>Account used for the authenticated scan needs to be able to execute following commands:

If I can execute these commands, will I be able to obtain all the necessary information?