Setting up authenticated scan for network devices (SNMPv3)

biedmic

To set up authenticated scan, when target is a network device (Cisco, Fortigate and Palo Alto devices are currently supported).

1. When creating a new scan, select SNMPv3 credentials as the authentication method:
   
2. Next fill in the data:
   1. Enter the SNMP port number (Default:161)
   2. Enter the SNMPv3 Username
   3. Select the Authentication Algorithm
   4. Define the Authentication Password
      
3. If encryption is used (authPriv security level), the Private encryption option must be enabled:
   
4. Select the Encryption Algorithm and define the Encryption Password used for encrypting SNMP messages.

Please note that it is recommended to first configure the device according to its user manual, and then configure SNMPv3 authenticated scanning accordingly. All settings should match the settings configured on the SNMP device.