-
PSB Install from Policy Manager
We currently have Policy Manager (On-Premises) and are changing to PSB. In the past there was a PSB package you could use with Policy Manager to perform the transition but this appears to no longer be an option since the change to Computer Security. Is there a .jar package for Computer Security that can be used in this way?
-
F-Secure workstation and java - Many problems
Hi @ll we have several issues with java based applications or software that uses java components. When F-Secure (Client Security and also Server Security) is active the programs start very slow ... especially Eclipse for developres Are there any recommended settings for java?
-
Policy Manager 14.01 ( sending alert "No Scanning Engine")
HI, Is anyone here encounter this issue? Scenario - Policy Manager 14.01 on alert status , "No Scanning Engine" message from FCS, But in the actual status on the client side the FCS are up and running no any issue like "malfunctioning" . Any other users encounter this? - Thanks
-
Computer Protection Firewall
Hi, Recently my computers updrades to Computer protection. I turn on windows firewall by GPO and activate use firewall on f-secure portal. But in my portal I see computer setting that firewall is turn on. Computer protection does not recognised the windows firewall. As I said windows firewall is turn on by gpo. I don know…
-
Computer Protection Firewall rules and 0.0.0.0 addresses
During migration of PSB Workstation profiles to Computer Protection, firewall rules using 0.0.0.0/0 were inadvertantly migrated as 0.0.0.0 [Before migration - PSB Workstation Firewall Profile]* Outbound TCP / UDP Traffic - Allow - Outbound - Remote IP Address: Any remote host (0.0.0.0/0) [After migration - Computer…
-
Creating an automated installation
Hi, I try to create an automated installation of FSCS Premium 14.02. The last screen shows me only two options : - Ask the user before restarting - Restart in x hours y minutes On previous version of this product, I was able to choose 'Do nothing' and then I was able to manager restart by myself with custom script. I could…
-
Use Policy settings on new independent server
We use fspms in 2 different, independent locations. After customizing the settings/policies in one place, I would like to apply the same policy to the second location so that I don't have to go through all the settings again or at least have basic settings to start from. Is there any way to do that?
-
Software Updater is not working
I have an issue where most of the Devices on the f-secure PSB portal are not updating anything. They are stuck on Update requested.I have them scheduled to update every day at 3 and have them restart instantly after. We have tried manually restarting the machines, turning on windows updater to Automatic and still no prompt…
-
Local Printing
Hello, we use the protection service on business. Since last week, it takes up to 40 seconds to print a document. If I disable computer protection and restart, the printout will work immediately. Does anyone have any idea why printing is blocked before I stop protecting it? Thanks, Markus
-
Problem in during attachment in mail
Dear sir, after client upgrade to 14.02 we are not able to attach file while sending documents through ikey through Mail. While attaching file message come antivirus not installed or not configured. Please help
-
Problen in distributing Policy
Hi, We have recently upgraded to F-Secure Policy Manager 14.01. Now we are facing some problems. We have approx 5000 clients reporting to FSPM 14.01. We have set the Proxy Update server also. Now, when I am changing the Proxy Update Server Address in Setting Tab and distribute the Policy than Policy distribution is not…
-
Creating Firewall Rule for Remote Desktop in FS14.02
Hi, I wnat to create firewall rule for clients 14.02 like that the client should be taken on remote by the specific PC in the sub-domain. Please advice which rule I should create for the same.
-
Setup ended prematurely
I want to install F-secure Server Security Premiun on server Windows 2016 Datacenter. The setup ended prematurely. How can I understand why? Thank you
-
Application Alerts not reporting in FSPM 14.01
Hi, I have created application rule for blocking of installed application to run. When I check it from the client the the user is not able to run the application. The get the message you don't have the permission to run this product, contact system administrator. But the alert is not shown in FSPM alert tab. Request advice.
-
Can not install Computer Protection by GPO
Hi, I tried to make a .msi with Computer Protection, following this :https://help.f-secure.com/product.html#business/psb-portal/latest/en/task_1D20317CD8164D828D0916C069BBDB9E-psb-portal-latest-en, but it doesn't work, I download the FsMsiTool but when I try to install, nothing happen, looks like its want to star the…
-
F-secure 13.11 stuck updating virus and spyware scanning on new install
Ive just upgraded from F-secure client security premium 9 to 13.11 build 100 and it is stuck updating virus and spyware scanning and scheduled scanning, for several hours so far. I have tried uninstalling it several times but it makes no diference, it will install but stays updating and then it will not scan anything.
-
Computer Protection Migration
This article gives an overview of the migration process from Workstation 12 series client to Computer Protection client. UPDATE: - All Solution Providers have been migrated, so all the migrated profiles are available - 31st of March, 2019: End of Life of Workstation Security client. The client will still receive security…
-
Ports used by PMC push installation?
Hi, which ports I need to open to get push installation working on a remote server?
-
How to install hotfixes in PMC13.12
Hi, I need to install hotfixes for FSCSPr 13.11 machines. I downloaded and imported hotfix https://download.f-secure.com/corpro/cs/cs13.x/fsfw1010-hf04-signed.jar (same thing with .fsfix) to FSPMC installation packages. When I go to "Installation" tab, there's no "hotfix" available for the cspr hosts. When I check "status"…
-
FIREWALL RULE CREATION FOR 14.01
Dear Sir, We upgraded our console and clients to 14.01. But white creating Firewall rule we are facing some difficulty as mentioned below: 1. For example we have set one Firewall Name as test. 2.We configure the rule for the Firewall Test. 3.Now we implemented the Test Firewall to Root. 4.Now if i want to edit the test…
-
F-secure 13.11 stuck updating virus and spyware scanning on new install
Ive just upgraded from F-secure client security premium 9 to 13.11 and it is stuck updating virus and spyware scanning and scheduled scanning, for several hours so far. I have tried uninstalling it several times but it makes no diference, it will install but stays updating and then it will not scan anything.
-
Import Policy file F-Secure 14
I have exported a policy file for a new host in Policy Manager. The client computer cannot connect to any network, for security reasons. I created the host manually in PM. So i have moved the policy file to the client computer, but i cant find a way to import it. In FS 12 it was easy(Tasks > Central Management > import).…
-
Computer protection lost excluded paths
Hi I installed proxy on server and attached some Computer Protection clients to that proxy. Everything worked fine until todat that user said that F-Secure is blocking the app that actually is white listes in the profile. I checked that client and the excluded list was empty, in Computer Prontection the update server was…
-
check system requirements error
Hi, When we install PSB installer package , we are facing the error "check system requirements" This version of windows is not supported, pls make sure you have the right operating system and service packs installed. We are using windows 10 operating system and checked the windows update which is up to date updated. Still,…
-
Importing policy file manually in Server Security?
Hello, Is it possible to manually import the policy file to Server Security (v12.12), like it is for Client Security (https://help.f-secure.com/product.html?business/client-security/13.10/en/task_395606788DF64681AB472ABCACBC0F45-13.10-en)? For some reason, when we migrate from one in-house Policy Manager server to another…
-
dbtracker
Hello, https://www.f-secure.com/dbtracker/ can be updated again please? Regards,
-
Mixed Clients V13/V14 - Firewall - How to / best practice ?
Hi, what to do in an mixed environnement with clients which are running 13.11. I have Office file and printer sharing as active profile and we have the Windows Firewall disabled by policy for the domain. FSCS14 run the firewall only when the Windows firewall is up and active. FSCS13 run their own firewall and Windows…
-
Computer Protection 19.2 will introduce .NET
Dear Partners and Customers, as we are preparing for the Computer Protection 19.2 release, it is time to give you a heads up on something that we've been working very hard on. The new release for the first time will include a dependency to Microsoft .Net as a technology for our future user interfaces in the clients. What…
-
F-Secure proxy port
Hi, TI am trying to install proxy on Windows 2012R2 and during the installation setup I got an error message: "The host Module HTTP port number specified is already in use". So that was about port 80 Which port do you advice to setup instead of 80?
-
Deleting f-secure 9.00 without CD
Hello everybody I want to ask for help deleting f-secure Anti-Virus for Workstations 9.00 When I try to remove the program through the control panel in Windows, it asks for a CD or media to complete the removal, which I don't have. Removing the program doesn't help either, I've removed the files in regedit to, but no sign…