-
Internet connection bandwidth question
Dear all I know that it is not directly related to F-secure messaging security gateway appliance, but I would appreciate your feedback experience on this. What Internet connection bandwidth should be adequate for an fsmsg filtering traffic for around 400 mailboxes? Thank you very much in advance Costas
-
Problems with e-mails from webmail plain text
I have a problem with "F-Secure PSB Workstation Security", for a few months or received some e-mails in my Outlook simlilar enter this format. If I have enabled the analysis of e-mail in f-secure client shows the content analysis but if you disable it entrantens mails do not show this information i the same e-mail with…
-
Help to remove caribarena.com malware
Hello, My system got infected with the caribarena.com malware. it is asking to pay $200 to get the unlock code.I am attaching the screenshot.Please help me to remove this malware. Thanks.
-
How to schedule scan only some folders on a single drive
Hello, i have a MS Server 2003. On that machine there are some shared folders that should be scanned every day. How can i create a schedule scan that just scans those shared folders on a single drive (all on drive d:). And nothing else, specially not the whole filesystem and all attached drives?
-
New installed hosts not showing in Policy Manager policy domains
I'm first time setting up Policy Manager on Win server 2008 R2. I managed to install client security through Autodiscover Windows hosts to Windows 7 computer in my domain. New installed host doesn't show up anywhere in my Policy manager. I can see it in Autodiscover Windows hosts, and I can see its FSMA version, platform…
-
FSAV PSB incoming POP3 mail scannig timeout problem suddenly appeared.
Dear Sirs, In recent days the e-mail scanning part of FSAV PSB 10.00 build 192 became very slow. Previously, the FSAV PSB mail scan took only about 4-8 seconds on messages which had no attachment. Now, it usually takes more than a minute to check 2-3 pieces of non-attachment e-mails (coming from a Linux mail server POP3…
-
Executbale version of 10.00 build 415 requested
Hello I have been using F-Secure Client Security 10.00.415, the version that is in executable form when it was installed. Now it comes in jar form and I don't need Policy Manager. The problem is with CS 10.00 build 415. Unfortunately, the executable install file I have is corrupted for some reason and I need to uninstall…
-
Different digest settings for different groups
Hello all. Does anyone know if possible to set different Digest email actions to different groups? While I have most of users allowed to release messages, I would like to have for a specific group of users to receive digest but not being able to release or delete. I have not found such thing in v6.x versions. Thank you…
-
Upgrading from PM 9.x to 11
Greetings. My Google-Fu was too weak to provide an answer, so let's ask you guys: I'm currently running an old 9.x version of Policy Manager. Now would be a convenient time to upgrade that to the latest version, but I am wondering... does the migration of data from previous versions of PM work properly if I skip PM 10.x…
-
Setting the policy variable was not successful
Hello, Since fairly recently I facing a problem with F-Secure Anti-Virus for Workstation. On three different Windows XP Clients the following error message is displayed: F-Secure Management Agent failed in an internal operation. Setting the policy variable 1.3.6.1.4.1.2213.11.2.14.8 (error=-2080374783) was not successful.…
-
pushing out new license
I've been using a trial key to demo Policy Manager and a bunch of clients. Now that we've bought a license, how can I push out the license to the clients? I'm not seeing a place in the policy settings for this. Also, is there a way I can export a package that already includes my new license? Or does this happen…
-
Email and Server Security 10.00 Exchange 10 GB required disk space
Hy Folks, i want to install the Server Security 10 on my Exchange Server but i don't have 10 GB free space and its hard to free the disc so is there a Problem when i only have less space (at the moment about 7GB) with the installation and when its running ? best
-
Client security 11 - F-Secure Anti-Virus ERROR
Hi all, after an installation of the new Client security 11 on a remote pc (win xp sp3) I report this error: Product: F-Secure Management Agent (OID: 1.3.6.1.4.1.2213.11) Severity: error (3) Message: The module F-Secure Anti-Virus Handler monitored by F-Secure Management Agent has stopped responding or was terminated.…
-
Brower protection disallowed sites creating lots of traffic
Hi! When Client security 11 came out, I updated it to a few test computers and also added a few sites to the the browser protection disallowed sites. youtube was one of those sites. Yesterday I got a call from our network specialist, that one of the test computers was creating about 50 Mbit upload / download traffic which…
-
PSB Client Not Updating
Hello, 2 of my 40 devices are not updating after the upgrade to PSB 10. The updates are downloaded but not installed. I've try reinstall, clean install, update reset and manual update, nothing works. Please advice. Thank You, Andrei
-
Software updater - install updates immediately after scan
Hi, how can I get updates to automatically install immediately after software updater scan? Updates are installed fine if I set the installation time in PM, and if I clear the installation time updates are not installed. Computers are using Win7.
-
customize virus alert
Hello, we use F-Secure F-Secure Antivirus for Workstations 9.10 - with F-Secure Client Security - Deepguard and with - Antivirus for Workstations Antivirus&AntiSpy On the Management-Server we use F-Secure Polecy Manager Server 10.00.36754 If a virus is found on a Client, I get a message, that a virus was found and…
-
Scan specific folder on many computers.
Hi I'd like to know if I can scan a folder ex. C:\windows\system32 on a lot of computers, by setting it up in the policy manager? I'm using Policy manager 10.20 As far as I know I go to advanced mode, click the policy tab, and find the scheduled tasks under F-Secure antivirus, in there I can add a task, give it a date/time…
-
Reset UID?
On early versions of Client Security we used command "fsmautil resetuid" before taking an image of installation. Now I haven't made any new images for couple years, but tomorrow we should create a new image of Win 7 workstation installation and spread it into some new machines. I noticed that the new version of Client…
-
Does anyone a script or registry key to disable F-security firewall
We try to deploy some software but F-security firewall cause some issue. I would like to know hoow to disable it for all users by a script or registry key modification? Any help will be appreciated. Thanks! Ginger
-
Email and server security 10.0 huge problems
Hi all! Yesterday i installed latest Email and Server security 10.00. it was working allright for one day. Now suddenly spam mails cannot quarantine by F-secure. My mailbox is filling with warnings. Database connection is ok and i'm using SQL server 2008 R2 express on same server as Exchange 2010 SP3. I understand that…
-
F-Secure Device Control Block USB Failed!
Dear Sir : My company using PMS (version 10.10.44982) and Client Security (9.32 build 112). We are using "Device Control Serivce" to prevent user using USB Storage Device and I found a problem when user insert USB Storage Device,right corner pop-up "Device was blocked" and I can see Windows Event Log & F-Secure Log file &…
-
Outside user registration in MSG
Is it possible for a outside user to start the registration process without first receiving a secure mail sent through MSG? This functionality is in Deltagon we currently use and it seems really a big inconvenience if the secure email communication must always be initiated by a user from inside the organization using MSG.
-
What to choose?
Hi I’m currently testing both PSB and Business suite premium. To my understanding PSB is somewhat less configurable than BSP and cheaper. PSB:s view of what’s up to date and what’s needs attention seems better and simpler. What do you recommend? I want the premium versions with software updater. And what’s the difference…
-
security
if any app downloaded after that f-secure asking security code.but i don't know the code. so pls tell me the solution.
-
F-Secure is treating
We have a standalone web application, in which for every URL request ( which calls CGI binary through system command), a new process is created. With this our application is working fine in normal environment. But in some systems where F-Secure anti-virus program is running there our application is extremely slow and…
-
Trojan not being quarantined
Dear fsecure team I have a customer who installted buinsess suite version 11 and he run a scan the below results have been shown and customer is asking why the Trojan has not been quarantined Result: 2 malware found Trojan.Generic.1722827 (virus) H:\counter\AutoPlay\Docs\09.Counter-Strike…
-
F-Secure publishes a hotfix for Anti-Virus for Microsoft Exchange 9.00-9.10
F-Secure has published the Hotfix 3 that fixes a vulnerability in a DLL component and that also fixes the Quarantine not having been accessible from the web console. More information from here. Feel free to ask questions about this hotfix in this thread.
-
F-SecureOnlineScanner.exe - where to download ?
On the page http://community.f-secure.com/t5/Security-for-PC/How-can-I-use-F-Secure-Online/ta-p/28502?skin=en&profile.language=en there is an advice to download the file F-SecureOnlineScanner.exe but there is no link to download it. Please help me to get the correct download link. I couldn't find it out here in the forum.…
-
glitch with PMC 11.00.47292 on Windows 2012 Std server
I just noticed that I am not able to select/highlight hosts while displaying them in Status->Installed software with intention to select host in the domain tree (Ctrl-H) The only right mouse click menu option is Export table as text... This option is fully funtional in ver 11.00.47292 under Windows 2003 server. Hosts can…