-
Backupassist/Windows Server Backup issue: "EFI system partition (ESP)"-error when "F-Secure Server S
Our environment: -> An "Windows 2012 R2" HyperV-host, which we will call further on W2012R2HYPERV, with "Backupassist version: 10.4.1" running on it ( this is a kind of "wrapper"-software around "Windows Server Backup") -> Another "Windows 2012 R2"-host, which we will call further on W2012R2ISCSITARGET, on which a…
-
F-secure psb workstation 10.6 from charter spectrum does not intall firewall and internet shield in
Since charter spectrum fails to help me with this problem I am reaching out to this group. Charter spectrum business cable provides psb workstation 10.6 but it does not fully install (fails to install firewall, internet shield and email scanning. Tried on several compures but no luck. Anybody have any ideas?
-
Trying to open port for PPTP in Computer Protection portal
I'm trying to open port 1723 for PPTP in Computer Protection. Can't seem to get it to work. I'm not sure if I'm doing it correctly or missing something.
-
how to recover data in F-Secure password protection
Hi, I accidentally deleted an important note under a password in my F-Secure Password Protection. Is there any possibility of recovering such a deleted note?
-
The "Windows Server guidance (KB4072698)" update is showing up in the list of critical updates for t
Good afternoon everyone, The "Windows Server guidance (KB4072698)" update is showing up for 135 computers and these computers are on the Critical Software update list, but the update is not for computers but for Servers. How do I get this update from the computers?
-
Can't deploy software - always get's blocked
I'm using ME Desktop Central for computer inventory and deployment. I'm triying to update ClipCache Pro, but the installer is always blocked. Some of the Win 10 machines are still running Workstation Security, some are running Computer Protection. I tried to exclude the whole software repository folder, but that didn't…
-
CP overload computers with their processes (F-Secure Host Process )
Hi. I have evidenced in several computers the overload of the system by the processes of F-Secure affecting the memory (consuming from 100MB up to a limit of 250MB). Also it happens to me with the disk that when initiating the system the process of F-Secure Host Process is consumed to the 100% the disk and doesn't lower…
-
F-secure Client Security Premium reports errors setting policy 1.3.6.1.4.1.2213.25.1.90.10
Details: F-Secure Management Agent failed in an internal operation. Setting the policy variable 1.3.6.1.4.1.2213.25.1.90.10 (error=-506) was not successful. If the problem persists, please contact the system administrator. I am getting these messages a lot. I can not remember changing this setting. Yesterday i did make a…
-
Block IPv6 settings from within Policy Manager?
Hi! Can't find to controll this setting from within Policy Manager. Where do I find it? Possible?
-
F-Secure Radar integration with ServiceNow SecOps
Hello, Any ideas where I might find documentation on how to integrate F-Secure Radar with ServiceNow's Security Operations?
-
Software updates : java jdk issue
Hello, I try to use the F-Secure software update to keep a computer updated and I have an issue with java software. On the computer, the java version is the last available : (build 1.8.0_181-b13) On the F-Secure portal, the system ask me to install this same version all the time and keep the computer under orange flag like…
-
Re: FSAUS.PM\data\db folder is too big
Hello i'm using PM 13.11.84108 on windows 2008 r2 64 bit my folder C:\Program Files (x86)\F-Secure\FSAUS.PM\data\db is about 46.5 Gb it contains 4 folders: 7119644, 7119645, 7119647, 7119648 the folder 7119648 is the more recent and contains most of the data (about 46.3 Gb) i checked the server.cfg file…
-
What is the purpose of [updateservices] firewall service?
Hi, I found firewall service [updateservices] in couple of PMCs. What is this, and what should it be used for? Does this exist by default, or has someone added it manually? Was building a new firewall profile, and while testing, I noticed that I could reach scopes that was not white listed. Found out, that [updateservices]…
-
Problem registering SRS with Policy Manager
1. I have deployed SRS in a VMware environment, assign password for admin user, change network settings correctly, and register to policy manager. 2. But, in policy manager console, I don´t have SRS registered or pending. 3. Trying to re-register from SRS console, but with the same effect (correctly form SRS console, no…
-
PSB (Protection Service For Business) trial
In Psb trial in computer protection when i turn off some category such as Social Media and when i opened this sites there are a message ( web site blocked ) but in Demo in users i can add web sites like www.facebook.com and when i try it in browse its open although i turn off in category. what should i do in this issue ?
-
Schedule report in PSB
I have two questions for PSB. 1. Can we configured the scheduled report in PSB? 2. Can we installed agent in Virtual windows 7 32 bit? if yes then which agent will be installed?
-
Policy Manager Server takes over all HTTPS (port 443) requests
Hello, On the same server we are running both F-Secure Policy Manager Server and several web services (helpdesk system, phpMyAdmin...). We would like to switch these web services to HTTPS but all HTTPS connections end up on a "If you see this message, F-Secure Policy Manager Server is installed and is working fine." page,…
-
Need to validate the key when i boot without internet connexion
Hi, I'm running Workstation Security 12.01 under Windows 10 Pro. In the fsecure management console, i can see that my computer is corretly registered. When i start my laptop with a wired connection, everything is ok. But if i start my laptop with no connexion, i always have this window asking me to end the installation and…
-
ERROR CODE '53',PUSH INSTALLATION 13.11V
1. The installation account have enough rights (has to be local or domain administrator). 2. Enable the Remote registry service on the clients ( To enable remote registry service go to Control Panel -> Administrative Tools -> Services -> Remote registry ) ------make startup type to AUTOMATIC 3. Windows Firewall is disable…
-
Feature request: Uniform client security status messages, no automatic scan with obsolete virus defi
Hi, 1) Would it be possible, that f-secure client would give unifiorm status messages, and not **it like this: https://ibb.co/fhWLae https://ibb.co/cpgmFe Also, when checking the virus definitions on the client, it says 32 days old. When checking from Policy manager, it says current. How about, having a same date on client…
-
Device removed from PSB portal accidentally
I removed a device (Computer Protection) accidentally from Portal PSB, does the machine back to communicate with the Portal PSB or do I need to reinstall the PSB product again in this machine? BR, Felipassas
-
F-Secure Deepguard blocks application, how to exclude that app from being blocked in FS Deepguard
F-Secure Deepguard blocks application, how to exclude that application from being blocked in FS Deepguard
-
F-Secure Client Security 13.11 not update Virus Definition
Hello, We have updated the workstations from version 9 to 13. Now we are unable to update the virus definitions. The log is: "Update check completed successfully. No updates are available." but it reports 7-day old definitions (that's the day we updated the product). I've also tried to turn off Policy Manager - then the…
-
F-Secure Gatekeeper crashing Server 2008 R2
We have a SBS 2011 server (Windows Server 2008 R2) with PSB E-mail and Server Security installed, version 12.10 build 280. Periodically (once every few weeks) the server becomes very slow or unresponsive to network traffic and is not able to accept log-ins from the console or Remote Desktop clients. The only solution is to…
-
How to disable RC4 on F-Secure Proofpoint
Good Day All, Does anyone know how to disable RC4 cipher on F-Secure ProofPoint? I have searched high and low but i have not been able to find anything. Thanks so much. :)
-
Trouble with Management API
Hello, I am attempting to initiate an endpoint operation via the management api using postman: I receive the above error "InvalidParameter" for a parameter called "operations". I am not sure where this is located in the enumerations for this URL, but I am having some trouble getting over this bump. Is it referring to the…
-
Warning Firewall , small datafragement source msnbot search.msn.com
Some computer in our domain get the following notification form F-secure Firewall "Firewall alert, Description: Suspiciously small datagram fragment. possibley a fragmentation attack" source: msnbot search.msn.com How can we get rid of the warnings? thankz
-
Web content control - Secure Connection Failed
Hi, As I wrote earlier, we have problems with tons of false positives on web content control. When you are using IE, you get a decent and clear message, Blocked Web site blockedhttps://www.certest.esThis web site contains restricted content. Access to this type of content has been blocked. Adult content However, if you are…
-
Installation of Server Security on Windows Server 2003
When i install the Server Security on Windows Server 2003 the wizard ends prematurely. The Server Security is probably not compatible with Server 2003? Is there a solution? Thank you
-
How to find out why my website is blocked
Hi There, A few weeks ago i reported my website as a false positive but i haven't received a response. So a week ago i submitted a new sample but still no response. Is there a way for me to find out why my website is blocked by F-secure? I have tried a lot of online scanners but all say my website is OK. The website is…