-
Post-February 2020 patching of Windows 7 computers with F-Secure PSB Software Updater?
Dear Sirs, If a Windows 7 computer runs F-Secure PSB CP 19.9, will the "Software Updater" module support installation of post-February 2020 Windows Update patches? (Officially, Microsoft Corp. is only providing those hotfixes to customers with extra "ESU" subscription purchase plan.) Thanks in advance, Yours Sincerely:…
-
F-Secure Internet Gatekeeper on Linux solution silently discontinued?
Dear Sirs, This week we wished to renew a 20-seat "FSAV IGK 5.50 on Linux" license for one of our customers but F-Secure staff responded that they no longer deal in that product. I can't understand that, since: - Official company "EOL" documentation show it as a current and supported product:…
-
F-secure license calculate
I have 05 server and 100 clients. So how many license I need to buy?
-
Using Application Control to help mitigate against new unpatched vulnerabilities
Sometimes software vendors will announce a vulnerability in their software, even before they have a patch available to solve the issue. They will often provide some information publicly which can be enough to help users avoid the problem, at least partially. Application Control, available in some of our Business Security…
-
WSUS on the same server where Policy manger and server are.
Can i install WSUS on the same server where i have installed policy manger and policy manger server? Does it cause any problems? If it's possible then how much extra ram do i need (currently using 8 GB).
-
auto update still show PMS IP
Hello everyone! I have selected update from proxy server and updated from it too But in "Automation updates" it still showing PMS IP It is display bug or something? Thanks
-
Automation updates
Hello everyone! I have selected update from proxy server and updated from it too But in "Automation updates" it still showing PMS IP It is display bug or something? Thanks
-
Low level of virus detection
Since the beginning of last year, I have noticed the lack of efficiency of F-Secure products to detect new threats, especially the .msi, .lnk, .htm and .vbs threats, and I believe that about 75% of new threats are passing through the F-Secure without being detected. In Brazil, daily hackers create bank Trojans using the…
-
F-secure server protection hang application
Hi After monday the F-Secure get taskmanager and other applications on terminslserver 2016 to hang, slow performances and busy or no answer from taskmanager, logon scripts slow or hang. I have tried all thing, but only disable realtimerscanne works. Please helt
-
After installation, the client uninstalls itself
Hey This is my last question what is happening with this program. As it installs on client hosts, it uninstalls itself in a moment. I'm sick of it and when I finish subscribing to this f-secure server I won't buy it, it's about 2k $ for what I pay. Server security 14.00 Policy manager 14.41 Client 14.22 Server M$ 2012 it's…
-
Can F-Secure replace WSUS?
Hi, I am not 100% sure if I am writing in the right category. If not please excuse me. We are currently having a lot of problems with our WSUS Server. Since we are already rolling out all of our 3rd party updates through F-Secure, I am wondering if it is possible to completely replace our old WSUS Server. If yes, which…
-
Update to Rapid Detection & Response email messaging service
Rapid Detection & Response (RDR) email messaging service will be updated March 16th 2020. After the email messaging service update content body will be base64 encoded compared to existing plain text. Base64 encoded message content can easily be decoded manually or using MIME library meant for mail handling. Usually all…
-
Quarantine Management
Hello, I'm having an issue with the centrally managed quarantine from Policy Manager 14.41, quarantined objects are not showing on the centrally managed quarantine, even though I get the notification alert from the hosts(Client Security 14.21) that a file has been blocked and moved to quarantine. How can I fix this…
-
Problem with network isolation..
Hi i have upgraded Policy Manager to version 14.41 and client for Windows to 14.21 and tried option Network isolation but it seams that id doesn't work. I created Network Isolation rule which says block all connections and after that tried to isolate one host but nothing happened. Only thing that I saw is this popup screen…
-
After server / policy manager upgrade to 14.30 PM slow - waiting for server
Hello After upgrade server and Policy Manager to 14.30 when I am connected from workstation I notice that there is some delay when moving from item to item and on lower left corner is written message: Waiting for server. For some items (computer, option...) after choosing them, going to next one and return to previous it…
-
F-Secure blocks powershell
As of this morning (2020-03-03) we're unable to execute powershell commands on both client workstations and servers. Even a simple get-childitem returns: The 'Get-ChildItem' command was found in the module 'Microsoft.PowerShell.Management', but the module could not be loaded. If we stop the "F-Secure Ultralight Network…
-
How best to verify F-Secure PSB CP19 firewalling functionality at the network layer?
Hello, How would you recommend to verify the operation of F-Secure PSB CP 19 firewalling? I mean we suspect that Windows 10 Security Center display may be showing factually incorrect "Firewall is disabled" info in red lettering on some clone-image based workstations, while the Microsoft FW engine is likely running and even…
-
Host polling intervals
Hello again, At Settings->centralized management->Host polling interval, I have set the time to every 2 hours, but some hosts may take up to 48 hours to fetch distributed policies. I would like to know if there is a way (other than the one mentioned above) to manually change host policy distribution packages polling…
-
Freedom for Business reactivation
Hi. I have a PSB license with one Freedom for Business subscription included. I installed and used the product on my IPhone last year . This subscription expired a few months ago, but now it is active again. However I'm not able to reactivate the subscription on my iPhone. I delete the application from my iPhone (both App…
-
Device Control USB not getting blocked
Hi, I'm trying to block USB storage devices, like USB and Smartphones but it's not working. Can you tell me how to block these devices, so that employees can't use their personal USBs and Smartphones to store their personal data on the work computers?
-
Missing Keyword Filter FSESS 14.0
Why was keyword filtering dropped in Email and Server Security 14.0? Will this feature be added again in the future?
-
F-Secure client 14.10 push - removing previous version 13.x
hi guys, I used our FSPM 14.20.88937 to push Client Security Premium 14.10 to our laptops. The "uninstall previous version if necessary" checkbox was checked. As a result, we're now seeing two different versions (the new one I pushed and the old 13.x version). In the systray I can see one F-Secure client icon and when I…
-
uninstall F-Secure Client Security 14.10 on multiple laptops
Hi, We need to uninstall F-Secure Client Security 14.10 on multiple laptops for a specific AD container (site). We tried using intune by launching the fsuninstall command (and using the correct parameters), but intune was unable to do this. The same command works flawlessly when launched from a cmd prompt on the client.…
-
F-Secure Software Updater using Command line / Software Updater install on Shutdown
Hello F-Secure Community, is there a possibilty to run the F-Secure Software Updater with command line options and / or to start the installation of the Software Updater when the System is shutting down? Thx and best regards.
-
F secure spinning wheel and Mac
I am a computer noob so it may be a stupid question, but: I have F secure client security for Mac. But I cant seem to start it properly. The icon is in the top right corner as if it is running. But when holding the cursor over it I get the spinning wheel and can do nothing. When I try to start it from the applications…
-
100% CPU and memory usage
I am having a issue with one update, when the computer protection tries to install the OneClient PSB 4.07.536 the CPU and memory hits 100% and stay there until reboot. Anyone is having this issue?
-
Email and Server security strips XLS files (not Autorun macro) with exclusion
Hi, is there any news on the problem. I have the same symtoms. BR
-
Update From Policy Manager 14.20 to 14.41
Hi, i want to know how can i update policy manager from version 14.20 to 14.41? Does it affects my end-point users that have client security 14.10 installed ?
-
Can PSB Computer Protection Premium automatically isolate from network the workstation in case of ra
Hi all. I'm evaluating the use of Premium version instead of Standard version of Computer Protection. The Premium version focuses a lot on ransomware prevention, so one of my customers asked me if the software can automatically isolate the endpoint from the network. I searhed the documentation and the forum, but I was not…
-
Powershell Get Installed Version of Software F-Secure
The Script should find out if F-Secure is installed and when installed get the Version: This works for me: $fsecure= (Get-ItemProperty HKLM:\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\* | Select DisplayName, DisplayVersion | findstr "F-Secure")$fver = (Get-ItemProperty…